HP Scanjet 5000 User Guide - Page 32
Securing the full-length expansion board retainer
View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Securing the full-length expansion board retainer 1. Power down the server (see Powering down the server on page 16). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Extend the server from the rack (see Extending the server from the rack on page 17). 4. Remove the access panel (see Removing the access panel on page 18). 5. Install a full-length expansion board (see Installing an expansion board on page 55). 6. Install the PCI riser cage (see Installing the PCI riser cage on page 23). 7. Secure the full-length expansion board retainer. 8. Install the access panel (see Installing the access panel on page 18). 9. Install the server into the rack (Installing the server into the rack on page 30). 10. Connect each power cord to the server. 11. Connect each power cord to the power source. 12. Power up the server (see Powering up the server on page 16). 24 Chapter 3 Operations