HP Scanjet 5000 User Guide - Page 86
The HP 12G SAS Expander Card is only supported in slot 2., If using a PCI slot-based controller
View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
8. Remove the expansion slot blank from slot 2. 9. Using the labels on the cables to determine the correct connections, connect the cables to the SAS expander card: a. Depending on the ports on the controller, connect the appropriate controller cables from Group A to the SAS expander card. Controller ports 2 x4 connectors 1 x8 connector Cable x4 mini-SAS cable x4 mini-SAS cable 2 x4 mini-SAS to x8 mini-SAS Y cable SAS expander parts Port 1 Port 2 Ports 1 and 2 b. Depending on the drive configuration, connect the appropriate drive cage cables to the SAS expander card. Drive configuration 2 SFF/3 LFF Cable group D Cable x4 mini-SAS cable 10. Install the SAS expander card. The cables are not shown for clarity. IMPORTANT: The HP 12G SAS Expander Card is only supported in slot 2. SAS expander ports Port 9 IMPORTANT: If using a PCI slot-based controller, install the controller in slot 1. 11. Install the PCI riser cage (see Installing the PCI riser cage on page 23). 12. Using the labels on the cables to determine the correct connections, connect the cables from the SAS expander card to the controller: 78 Chapter 5 Hardware options installation