HP Scanjet 5000 User Guide - Page 26
Removing the access panel, WARNING, CAUTION
View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing the access panel WARNING! To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in this manner results in improper airflow and improper cooling that can lead to thermal damage. To remove the component: 1. Power down the server (see Powering down the server on page 16). 2. Extend the server from the rack (see Extending the server from the rack on page 17). 3. Open or unlock the locking latch, slide the access panel to the rear of the chassis, and remove the access panel. Installing the access panel 1. Place the access panel on top of the server with the hood latch open. Allow the panel to extend past the rear of the server approximately 1.25 cm (0.5 in). 2. Push down on the hood latch. The access panel slides to a closed position. 3. Tighten the security screw on the hood latch. 18 Chapter 3 Operations