HP Scanjet 5000 User Guide - Page 83

HP 12G SAS Expander Card

Get HP Scanjet 5000 PDF manuals and user guides View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

7. Install the access panel (see Installing the access panel on page 18). 8. Slide the server into the rack. 9. Connect the LAN segment cables. 10. Connect each power cord to the server. 11. Connect each power cord to the power source. 12. Power up the server (see Powering up the server on page 16). HP 12G SAS Expander Card Before installing the HP 12G SAS Expander Card, observe the following requirements: ● The following components must be installed: ◦ Storage controller ● The SAS expander card is supported only in slot 2 of the primary PCI riser cage. It is not supported in the secondary riser cage. ● To ensure cables are connected correctly, observe the labels on the cable and component connectors. ● Be sure you have the latest firmware for the controllers, HBAs, and the expander card. To download the latest firmware, go to the HP website http://www.hp.com/go/hpsc. ● Understand the required cable connections: ◦ Group A-Controller to SAS expander card Cable 776408-001 776409-001 781580-001 Description X4 mini-SAS cable X4 mini-SAS cable 2 x4 mini-SAS to x-8 miniSAS Y cable Connection to SAS expander Port 2 Port 1 Ports 1 and 2 Connection to Controller Port 2 Port 1 Port 1 HP 12G SAS Expander Card 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
7.
Install the access panel (see
Installing the access panel
on page
18
).
8.
Slide the server into the rack.
9.
Connect the LAN segment cables.
10.
Connect each power cord to the server.
11.
Connect each power cord to the power source.
12.
Power up the server (see
Powering up the server
on page
16
).
HP 12G SAS Expander Card
Before installing the HP 12G SAS Expander Card, observe the following requirements:
●
The following components must be installed:
◦
Storage controller
●
The SAS expander card is supported only in slot 2 of the primary PCI riser cage. It is not supported in the
secondary riser cage.
●
To ensure cables are connected correctly, observe the labels on the cable and component connectors.
●
Be sure you have the latest firmware for the controllers, HBAs, and the expander card. To download the
latest firmware, go to the HP website
go/hpsc
.
●
Understand the required cable connections:
◦
Group A—Controller to SAS expander card
Cable
Description
Connection to SAS
expander
Connection to Controller
776408-001
X4 mini-SAS cable
Port 2
Port 2
776409-001
X4 mini-SAS cable
Port 1
Port 1
781580-001
2 x4 mini-SAS to x-8 mini-
SAS Y cable
Ports 1 and 2
Port 1
HP 12G SAS Expander Card
75