HP Scanjet 5000 User Guide - Page 25
Extending the server from the rack, Removing the server from the rack
View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Extending the server from the rack 1. Pull down the quick release levers on each side of the server. 2. Extend the server from the rack. WARNING! To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack. 3. After performing the installation or maintenance procedure, slide the server back into the rack, and then press the server firmly into the rack to secure it in place. WARNING! To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the server into the rack. The sliding rails could pinch your fingers. Removing the server from the rack To remove the server from an HP, Compaq branded, telco, or third-party rack: 1. Power down the server (see Powering down the server on page 16). 2. Extend the server from the rack (see Extending the server from the rack on page 17). 3. Disconnect the cabling and remove the server from the rack. For more information, see the documentation that ships with the rack mounting option. 4. Place the server on a sturdy, level surface. Extending the server from the rack 17