HP Workstation x2000 ATI Fire GL 4 graphics card users guide - Page 13
System Requirements and Tools, Information Before you Start - bios
View all HP Workstation x2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the Fire GL4 9 Information Before you Start What do you need to use your Fire GL4? System Requirements and Tools • Motherboard with free AGP 1.X slot. Note: The bracket of the Fire GL4 also covers the expansion slot next to the AGP slot. • System interrupt (IRQ) which is free. This may have to be reserved in the computer's BIOS. For help with this subject, refer to the manual for your mainboard • Pentium II CPU or better • Supported operating system - Windows NT 4.0 with Service Pack 6 (or higher) - Windows 2000 • A screwdriver to remove and reinstall the PC cover screws and card mounting screws. See your PC manual for specific requirements. • Fire GL CD-ROM for Fire GL4 What type of monitors do you need? Your Fire GL4 is optimally configured to be combined with digital flat-panel (DFP) TFT LCD displays and digital CRT displays. You can also connect the Fire GL4 to high-resolution MultiSync or multifrequency monitors or other VGA monitors. To connect VGA monitors you may use the provided VGA->DVI adapters. Note: You can use the full power of the graphics card only if your monitor supports the horizontal (kHz) and vertical (Hz) refresh rates as required by the graphics card. Refer to your monitor's documentation for recommended refresh rates