HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software User's Guide - Page 93
container set global_failover {scsi_device}, container set failover {container} {scsi_device}
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Using the Command Line Interface /write_cache_enable-Specifies whether to set the container's NVRAM write-back cache to disable, enable when protected, or enable always. Use this switch in conjunction with the /unprotected switch. container set failover {container} {scsi_device} [{scsi_device}...] Assigns an automatic failover disk for a single array. Parameters {container}-ID of the array on which to assign an automatic failover disk(s). {scsi_device}-ID for the SCSI device to assign as a failover disk. {scsi_device}...-ID(s) for additional SCSI device(s) to assign as failover disk(s). container set global_failover {scsi_device} [{scsi_device}...] Assigns an automatic failover disk for all arrays. Parameters {scsi_device}-ID for the SCSI device to assign as a failover disk. {scsi_device}...-ID(s) for additional SCSI device(s) to assign as failover disk(s) to all arrays. container set io_delay {container} {integer} Sets the I/O delay (in milliseconds). Parameters {container}-ID of the array on which to set the I/O delay. {integer}-Number of milliseconds the controller waits between I/O operations. 4-27