HP Z6100 HP Designjet Z6100 Printer Series - User's Guide - Page 48

15. If you have a take-up reel (a standard feature on the 60-inch printer and an optional accessory on the 42-inch printer) and it is enabled, you will see the "Take-up reel enabled" message on the frontpanel Paper tab. In this case, a message will appear on the front panel asking if you want to load paper into the reel. If you select No (or if you do not have a take-up reel) the front panel displays the Ready message and the printer is ready to print. If you select Yes, a message will appear on the front panel asking if you want to load the take-up reel now or during printing. ● If you want to load the take-up reel now, select Load take-up reel now, read through the introductory text in the section Use the take-up reel on page 38, and then continue to step 3 of the procedure. ● If you want to load the take-up reel during printing, select Load it during printing, read through the introductory text in the section Use the take-up reel on page 38, and then continue to step 3 of the procedure. NOTE: Familiarize yourself with the procedural steps, because loading the take-up reel while printing requires you to complete the procedure while the printer is feeding and printing paper. Loading the take-up reel during printing saves approximately 1 m (3 feet) of paper. If the take-up reel is not enabled and you would like to enable it, select the select Take-up reel > Enable. icon, and then NOTE: During the initial printer set up, printhead alignment and color calibration is performed automatically after the roll is loaded into the printer. Unload a roll from the printer NOTE: If you used the take-up reel (a standard feature on the 60-inch printer and an optional accessory on the 42-inch printer) during printing, unload the printed roll from the take-up reel before attempting to remove the roll from the printer. See Unload a roll from the take-up reel on page 43. Initiate the procedure for unloading a roll from the printer the front panel or by lifting the paper-load lever. In either case, a front-panel animation guides you through the remainder of the procedure. Before unloading a roll, check whether the end of the roll is still attached to the spindle, and follow the appropriate procedure as described in the following sections. Handle the paper 36 Chapter 4 Handle the paper