HP bc1000 Setup & Installation Guide - Page 103

Table D-4: Is the Enclosure Power LED on the Rear Panel Green?, CAUTION

Get HP bc1000 - Blade PC PDF manuals and user guides View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

Troubleshooting Ä CAUTION: Pressing the enclosure power button while the enclosure is running shuts down the enclosure and all Blade PCs. Table D-4: Is the Enclosure Power LED on the Rear Panel Green? Answer Possible Reasons Possible Solutions No, it is off. The cable is not properly connected between the fan backplane and the power backplane. Be sure that the connectors on the fan cable are properly seated and not damaged. The interconnect tray is not fully inserted. Remove and reseat the interconnect tray. The Integrated Administrator module is not properly seated. Contact HP or your authorized service provider for parts and service. The fan backplane assembly has failed. The connector on the power backplane is damaged. The power backplane has failed. No, it is amber. The enclosure is in standby mode. Push the enclosure power button on the fan cage at the rear of the enclosure. Caution: Pressing the enclosure power button while the enclosure is running shuts down the enclosure and all Blade PCs. Yes, it is green. If the enclosure power LED is green, return to Table D-1. Setup and Installation Guide www.hp.com D-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Setup and Installation Guide
www.hp.com
D-9
Troubleshooting
Ä
CAUTION:
Pressing the enclosure power button while the enclosure is
running shuts down the enclosure and all Blade PCs.
Table D-4: Is the Enclosure Power LED on the Rear Panel Green?
Answer
Possible Reasons
Possible Solutions
No, it is off.
The cable is not properly
connected between the fan
backplane and the power
backplane.
Be sure that the connectors on the fan
cable are properly seated and not
damaged.
The interconnect tray is not fully
inserted.
Remove and reseat the interconnect
tray.
The Integrated Administrator
module is not properly seated.
Contact HP or your authorized service
provider for parts and service.
The fan backplane assembly has
failed.
The connector on the power
backplane is damaged.
The power backplane has failed.
No, it is amber.
The enclosure is in standby
mode.
Push the enclosure power button on
the fan cage at the rear of the
enclosure.
Caution:
Pressing the enclosure
power button while the enclosure is
running shuts down the enclosure and
all Blade PCs.
Yes, it is green.
If the enclosure power LED is green, return to Table D-1.