HP bc1000 Setup & Installation Guide - Page 66
Heading, Option, Description, English or German for System ID entry.
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Deployment and Management Computer Setup (F10) Utility (Continued) Heading Option Description Storage (continued) IDE DPS Self-Test Allows you to execute self-tests on IDE hard drives capable of performing the Drive Protection System (DPS) self-tests. ✎ This selection will only appear when at least one drive capable of performing the IDE DPS self-tests is attached to the system. Boot Order Allows you to specify the order in which attached peripheral devices (such as a hard drive, USB device, or network interface card) are checked for a bootable operating system image. Each device on the list may be individually excluded from or included for consideration as a bootable operating system source. Security Setup Password Allows you to set and enable setup (administrator) password. ✎ If the setup password is set, it is required to change Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. System IDs Allows you to set: • Asset tag (18-byte identifier) and ownership Tag (80-byte identifier displayed during POST). • Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.) • Keyboard locale setting (for example, English or German) for System ID entry. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. 5-8 www.hp.com Setup and Installation Guide