HP bc1000 Setup & Installation Guide - Page 40
Cabling the HP CCI Solution, Installing the Interconnect
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing and Cabling the HP CCI Solution To load the enclosure into the rack: 1. Install the interconnect tray. See the "Installing the Interconnect Tray" section in this chapter. 2. Stand at the front of the rack. 3. Align the bottom of the enclosure with the top of the rack rails. 4. Slide the enclosure fully into the rack 1. 5. Tighten the thumbscrews to secure the enclosure in the rack 2. Installing the enclosure into the rack Cabling the HP CCI Solution An HP CCI solution requires no internal cabling. External cabling is achieved through the interconnect switch installed in your solution. The procedure for cabling an enclosure consists of the following steps: ■ Identifying the interconnect switch connectors ■ Cabling the blade enclosure 4-12 www.hp.com Setup and Installation Guide