HP bc1000 Setup & Installation Guide - Page 52
Removing a Blade PC, Installing Additional Memory
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing and Cabling the HP CCI Solution Removing a Blade PC To remove a Blade PC: 1. Press the release latch 1. 2. Pull down the ejector lever 2. 3. Remove the Blade PC from the enclosure 3. Removing a Blade PC Installing Additional Memory The Blade PCs support the following memory features: ■ Unregistered SODIMM DDR 333 memory For more information, refer to QuickSpecs located on the HP website: www.hp.com ■ 512MB system memory expandable to 1GB (32MB of system memory is reserved for processor usage) ■ Two SODIMM slots 4-24 www.hp.com Setup and Installation Guide
4-24
www.hp.com
Setup and Installation Guide
Installing and Cabling the HP CCI Solution
Removing a Blade PC
To remove a Blade PC:
1. Press the release latch
1
.
2. Pull down the ejector lever
2
.
3. Remove the Blade PC from the enclosure
3
.
Removing a Blade PC
Installing Additional Memory
The Blade PCs support the following memory features:
■
Unregistered SODIMM DDR 333 memory
For more information, refer to
QuickSpecs
located on the HP
website:
www.hp.com
■
512MB system memory expandable to 1GB (32MB of system
memory is reserved for processor usage)
■
Two SODIMM slots