HP bc1000 Setup & Installation Guide - Page 109
Problems After Initial Boot, You must install the optional graphics diagnostic card on the Blade
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Troubleshooting 4. Check the monitor (installed to the Blade PC via the diagnostic adapter) for the following messages that ensure that your Blade PC meets the minimal hardware requirements and is powered up during normal operations: ❏ HP logo ❏ Memory test ❏ ROM information ❏ Copyright information ❏ Processor initialization ❏ PXE initialization ❏ Operating system initialization ✎ You must install the optional graphics diagnostic card on the Blade PC before using a monitor with the diagnostic adapter. If the Blade PC completes POST and attempts to load the operating system, go to the "Problems After Initial Boot" section in this appendix. Setup and Installation Guide www.hp.com D-15
Setup and Installation Guide
www.hp.com
D-15
Troubleshooting
4. Check the monitor (installed to the Blade PC via the diagnostic
adapter) for the following messages that ensure that your Blade
PC meets the minimal hardware requirements and is powered up
during normal operations:
HP logo
Memory test
ROM information
Copyright information
Processor initialization
PXE initialization
Operating system initialization
You must install the optional graphics diagnostic card on the Blade
PC before using a monitor with the diagnostic adapter.
If the Blade PC completes POST and attempts to load the operating
system, go to the
“Problems After Initial Boot”
section in this
appendix.