HP bc1000 Setup & Installation Guide - Page 98
HP ProLiant BL e-Class, Integrated Administrator User Guide, Servers, Troubleshooting Guide
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Troubleshooting 8. If the Integrated Administrator is rebooting repeatedly, be sure that it is not rebooting due to a problem that initiates an Enclosure Self Recovery (ESR) reboot. Refer to the following sections in the HP ProLiant BL e-Class Integrated Administrator User Guide on the Documentation CD that ships with your enclosure: ❏ "Enclosure Self Recovery" ❏ "System Short Circuit" for other continuous rebooting problems 9. Restart the enclosure by pressing the enclosure power button on the fan cage on the rear of the enclosure. Ä CAUTION: Pressing the enclosure power button while the enclosure is running shuts down the enclosure and all Blade PCs. IMPORTANT: If the enclosure does not restart, proceed to "Table D-1: Enclosure Diagnostic Steps" in this appendix. 10. Be sure that connectors and components are seated properly. Refer to the "General Loose Connections" section in the Servers Troubleshooting Guide on the Documentation CD that ships with your enclosure. D-4 www.hp.com Setup and Installation Guide