HP bc1000 Setup & Installation Guide - Page 48
Install the Blade PC, Press the release latch
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Installing and Cabling the HP CCI Solution 4. Install the Blade PC: a. Align the Blade PC with the Blade PC bay on the enclosure and slide the blade partially into the enclosure. b. Press the release latch 1 on the blade. c. Pull down the ejector lever 2. Opening the blade eject lever 4-20 www.hp.com Setup and Installation Guide
4-20
www.hp.com
Setup and Installation Guide
Installing and Cabling the HP CCI Solution
4. Install the Blade PC:
a.
Align the Blade PC with the Blade PC bay on the enclosure
and slide the blade partially into the enclosure.
b.
Press the release latch
1
on the blade.
c.
Pull down the ejector lever
2
.
Opening the blade eject lever