HP bc1000 Setup & Installation Guide - Page 34
the back of the rack., Remove the rack template from the front of the rack and move
View all HP bc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing and Cabling the HP CCI Solution 3. Align the rack template so that its sides are square with the sides of the rack. IMPORTANT: Tick marks on the rack supports help you to maintain proper alignment of the rack template. 4. Use a pencil to mark an "M" at the locations on the rack where the rack rails are to be inserted 1. 5. On the rack, mark the top and bottom edges of the rack template to help align the rack template for the next enclosure 2. Marking the rack for enclosure installation 6. Remove the rack template from the front of the rack and move to the back of the rack. 7. Identify the back side of the rack template. 8. Repeat steps 2 through 5 for the back of the rack. ✎ Store the rack template for future use. 4-6 www.hp.com Setup and Installation Guide