HP mt245 mt245 Mobile Thin Client Maintenance and Service Guide - Page 44
USB board, Remove the Phillips PM2.5×3.0 screw
View all HP mt245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
USB board Description USB board (includes cable) Spare part number 813515-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the bottom cover (see Bottom cover on page 25). To remove the USB board: 1. Disconnect the USB board cable from the system board (1). 2. Remove the Phillips PM2.5×3.0 screw (2) that secures the USB board to the computer. 3. Lift the USB board (3) from the computer. 4. Lift the cable to disengage the adhesive that secures it to the computer (4). Reverse this procedure to install the USB board. 36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts