HP mt245 mt245 Mobile Thin Client Maintenance and Service Guide - Page 47
Power button board, Remove the Phillips PM2.5×3.5 screw
View all HP mt245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Power button board Description Power button board (includes cable) Spare part number 813516-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the bottom cover (see Bottom cover on page 25). To remove the power button board: 1. Disconnect the power button board cable from the system board (1). 2. Disconnect the power connector cable from the system board (2). 3. Remove the Phillips PM2.5×3.5 screw (3) that secures the power button board to the top cover. Component replacement procedures 39