HP mt245 mt245 Mobile Thin Client Maintenance and Service Guide - Page 63
Power connector cable, Remove the display see
View all HP mt245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Power connector cable Description Power connector cable Spare part number 813505-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the bottom cover (see Bottom cover on page 25). 6. Remove the display (see Display assembly on page 48). To remove the power connector cable: 1. Disconnect the cable from the system board (1). 2. Lift the tape that secures the connector to the computer (2). 3. Remove the cable from the clips around the fan (3), and then lift the power connector cable from the computer (4). Reverse this procedure to install the power connector cable. Component replacement procedures 55