Huawei Mate 9 Pro User Guide - Page 165
Sound, recorder
View all Huawei Mate 9 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
4 Select the button that you want to auto-learn. 5 When prompted, align the infrared sensor at the top of the phone with the infrared emitter on the physical remote Both devices should be Within 5 cm (2 inches) of each other On the physical remote. press and hold the button you want to auto-learn for at least two seconds. 6 If auto-learn is successful, the Save button at the bottom of the screen will become available Touch this to save the IP code and continue adding other buttons. 7 Repeat steps 4. 5. and 6 to configure other buttons 8 Touch tl > OK to save the remote Using Smart Controller After adding remotes, open Smart Controller and select the remote for the appliance you want to operate To use a remote. first point the infrared emitter on your phone at the appliance The appliance must be within range and in direct line of sight. If the appliance does not respond :o one of the buttons on the remote. touch the El icon et the top of the screen. Select the unresponsive button and follow the onscreen instructions to re-learn it. Managing remotes You can pin, edit, rename,, or delete Smart Controller remotes. You can also enable or disable keypress sounds and vibrations Pinning, editing, renaming, or deleting a remote 0 Open Smart Controller. 2 Touch and hold a remote. You can ten Delete, Rename Pin to top or Edit it. You cannot pin a remote if it is already at the top of the list • You cannot edit air conditioner remotes. Configure keypress sounds Open 0 Smart Controller 2 Touch = to open the Settings interface You can switch Keypress sound and Keypress vibration on or off Sound recorder Recording sound Use the Recorder app to record sound in a variety of different scenarios, such as meetings, interviews or your own voice 1 Touch ',Sound Recorder 159