IBM 72332MU Installation Guide - Page 32
Attention, To avoid breaking the DIMM retaining clips or damaging
UPC - 883436084673
View all IBM 72332MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Release latch Attention: When you move the memory card, do not allow it to touch any components or structures inside the server. 5. Remove the memory card: a. Slide the orange release latch to the unlocked position. Attention: To avoid loss of data, make sure that the memory port power LED is off before you remove the memory card. b. Open the retention levers on the top of the memory card. c. While you hold the retention levers open, lift the memory card out of the server. 6. Place the memory card on a flat, static-protective surface, with the DIMM connectors facing up. Attention: To avoid breaking the DIMM retaining clips or damaging the DIMM connectors, open and close the clips gently. 7. Open the retaining clip on each end of the DIMM connector. 8. Touch the static-protective package that contains the DIMM to any unpainted metal surface on the server. Then, remove the DIMM from the package. 9. Turn the DIMM so that the DIMM keys align correctly with the slot. 20 IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: Installation Guide