IBM 72332MU Installation Guide - Page 88
customer replaceable units CRU and which components are field replaceable units FRU., is solved.
UPC - 883436084673
View all IBM 72332MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Lit light path diagnostics LED with the system-error LED also lit Description Action DASD A hard disk drive has failed or has been removed. Note: The error LED on the failing hard disk drive is also lit. 1. Reinstall the removed drive. 2. Reseat the following components: a. Failing hard disk drive b. SAS hard disk drive backplane c. SAS signal cable d. I/O board shuttle assembly 3. Replace the components listed in step 2 one at a time, in the order shown, restarting the server each time. RAID The RAID controller has indicated a fault. 1. Check the BMC log or the system-error log for information. 2. Reseat the following components: a. RAID controller, if possible b. Hard disk drives c. I/O board shuttle assembly 3. Replace the components in step 2 one at a time, in the order shown, restarting the server each time. BOARD The microprocessor board or I/O board has failed. 1. Find the failing board by checking the LEDs on the microprocessor board and I/O board. 2. Reseat the failing board. 3. Replace the failing board. 76 IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: Installation Guide