IBM 72332MU Installation Guide - Page 36
Rotate the heat-sink clip to its fully open position.
UPC - 883436084673
View all IBM 72332MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
9. Touch the static-protective package that contains the new microprocessor to any unpainted metal surface on the server; then, remove the microprocessor from the package. Attention: To avoid bending the pins on the microprocessor, do not use excessive force when you press it into the socket. 10. Position the microprocessor over the microprocessor socket as shown in the following illustration. Carefully press the microprocessor into the socket. Microprocessor Microprocessor orientation indicator Microprocessor connector Microprocessorrelease lever 11. Close the microprocessor-release lever to secure the microprocessor. Heat-sink retention clip Alignment posts 12. Remove the heat sink from its package and open the heat-sink retention clip: a. Release the heat-sink retention clip from the locked position. b. Rotate the heat-sink clip to its fully open position. 13. Remove the cover from the bottom of the heat sink. 14. Position the heat sink above the microprocessor and align the heat sink with the alignment posts; then, press on the top of the heat sink, rotate the heat-sink release lever, and move the lever to the locked position. 15. Install a VRM in the connector next to the microprocessor socket. 24 IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: Installation Guide