IBM 72332MU Installation Guide - Page 47
route each cable through the wire-form clip that is associated with the server
UPC - 883436084673
View all IBM 72332MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
e. Connect one end of a 3.0 m (9.8-foot) ScaleXpander cable to port 2 on node 2; then, connect the other end to port 2 on node 4. f. Connect one end of a 3.0 m (9.8-foot) ScaleXpander cable to port 3 on node 3; then, connect the other end to port 3 of node 4. Wire-clip forms 3. Route the ScaleXpander cables through the cable-management arm. Be sure to route each cable through the wire-form clip that is associated with the server to which it is connected. Note: When disconnecting the cables from the server, carefully push down on the blue tabs, then pull the cables out of the connectors. Chapter 2. Installing optional devices 35
e.
Connect one end of a 3.0 m (9.8-foot) ScaleXpander cable to port 2 on
node 2; then, connect the other end to port 2 on node 4.
f.
Connect one end of a 3.0 m (9.8-foot) ScaleXpander cable to port 3 on node
3; then, connect the other end to port 3 of node 4.
Wire-clip forms
3.
Route the ScaleXpander cables through the cable-management arm. Be sure to
route each cable through the wire-form clip that is associated with the server to
which it is connected.
Note:
When disconnecting the cables from the server, carefully push down on the
blue tabs, then pull the cables out of the connectors.
Chapter 2. Installing optional devices
35