IBM 72332MU Installation Guide - Page 43
Three-node configuration
UPC - 883436084673
View all IBM 72332MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Port 1 Port 2 Port 3 Node 1 Node 2 2. Connect the ScaleXpander cables: Note: Do not squeeze the blue cable tabs when connecting the cables. Use the blue tabs only when disconnecting the cables from the servers. a. Connect one end of a ScaleXpander cable to port 1 on node 1; then, connect the other end to port 1 on node 2. b. Connect one end of the second ScaleXpander cable to port 2 on node 1; then, connect the other end to port 2 on node 2. Wire-clip forms 3. Route the ScaleXpander cables through the cable-management arm. Be sure to route each cable through the wire-form clip that is associated with the server to which it is connected. Three-node configuration A three-node configuration requires three 3.0 m (9.8-foot) ScaleXpander cables. To cable a three-node configuration for up to a 12-socket operation, complete the following steps: 1. Label each end of each ScaleXpander cable according to where it will be connected to each server. Chapter 2. Installing optional devices 31