IBM 8478 Hardware Maintenance Manual - Page 100
CD-ROM, drive
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
To remove the system board, do the following: 1. Power-off the server, if it is on. 2. Unplug the server. 3. Remove the cover (see "Removing the side cover" on page 46). 4. Remove the front bezel (see "Removing the bezel" on page 48). 5. Remove the support bracket (see "Removing the support bracket assembly" on page 49). 6. Disconnect the cables. 7. Remove the adapter cards and both adapter retaining brackets (see "Installing an adapter" on page 51). 8. Remove the hot-swap hard disk drive cage (see "Hard disk drive cage" on page 87). 9. Remove memory modules (see "Installing memory modules" on page 61). 10. Remove microprocessors and/or terminator cards (see "Removing and installing a microprocessor" on page 63). 11. Remove screws and lift the system board out of the server. CD-ROM drive Before you begin: v Read "Safety information" on page 125. v Review the information in "Before you begin" on page 44. 90 Hardware Maintenance Manual: xSeries 200
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/100.png)