IBM 8478 Hardware Maintenance Manual - Page 67
Preinstallation
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
EMC shield Filler panel Complete the following steps to install a drive in bay 2 or 4: 1. Read the information in "Preinstallation steps (all bays)" on page 56. 2. Turn off the server and peripheral devices and disconnect external cables and power cords; then, remove the side cover (see "Removing the side cover" on page 46 for details). 3. Remove the support bracket assembly and disconnect the fan cable from the connector (SYSFA3) on the system board. See "Removing the support bracket assembly" on page 49 and "System board internal cable connectors" on page 42 for the location of the fan cable connector. 4. Use a screwdriver to gently pry the filler panel and EMC shield away from the server. Note: If you are installing a drive that is a laser product, observe the following safety precaution: Chapter 5. Installing options 57
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/67.png)