IBM 8478 Hardware Maintenance Manual - Page 79
Installing, security, U-bolt
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Installing a security U-bolt To help prevent hardware theft, you can add a security U-bolt and cable to your server. After you add the security cable, make sure that it does not interfere with other cables that are connected to the server. Complete the following steps to install a U-bolt: 1. Review the safety precautions listed in "Safety information" on page 125. 2. Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the cover (see "Removing the side cover" on page 46 for details). 3. Use a screwdriver to remove the two metal knockouts. 4. Insert the U-bolt through the rear panel; then, attach and tighten the nuts. 5. If you have other options to install or remove, do so now. 6. Replace the side cover, see "Installing the cover" on page 70. 7. Thread the cable through the U-bolt and around an object that is a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then, fasten the cable ends together with a lock. Chapter 5. Installing options 69
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/79.png)