IBM 8478 Hardware Maintenance Manual - Page 97
information, service
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 6. FRU information (service only) Field Replacement Units (FRUs) should be replaced by qualified service personnel only. Hard disk drive cage Before you begin: v Read "Safety information" on page 125. v Review the information in "Before you begin" on page 44. To remove the hard disk drive cage, do the following: 1. Power-off the server, if it is on. 2. Unplug the server. 3. Remove the front bezel (see "Removing the bezel" on page 48). 4. Remove the cover (see "Removing the side cover" on page 46). 5. Remove the support bracket (see "Removing the support bracket assembly" on page 49). 6. Remove any hard disk drives or drive fillers from the drives. 7. Disconnect the hard disk drive cables from the system board. 8. Remove the screws from the front of the hard disk drive cage. 9. Move the cage slightly in and up until it is free of the chassis and lift it out of the server. © Copyright IBM Corp. 2000 87
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/97.png)