IBM 8478 Hardware Maintenance Manual - Page 103
Guide, assembly, speaker
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
6. Disconnect the cable of the button kit from the system board. 7. Place a screwdriver against the bottom release latch of the button kit and gently press upward and slide the latch through the aperture. 8. Gently pinch together the upper release latches and slide the latches through the aperture and remove the button kit. Guide assembly / speaker Before you begin: v Read "Safety information" on page 125. v Review the information in "Before you begin" on page 44. To remove the speaker, do the following: 1. Power-off the server, if it is on. 2. Unplug the server. 3. Remove the cover (see "Removing the side cover" on page 46). 4. Remove the front bezel (see "Removing the bezel" on page 48). 5. Remove the support bracket (see "Removing the support bracket assembly" on page 49). 6. Remove all adapter cards. 7. Unplug the speaker from the system board. Chapter 6. FRU information (service only) 93
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/103.png)