IBM 8478 Hardware Maintenance Manual - Page 124
Error, Code/Symptom, FRU/Action, Microprocessor, Configuration/Setup, Remove, Failing
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Error Code/Symptom FRU/Action 00019501 1. Microprocessor 1 (Microprocessor 1 is not 2. System Board functioning - check VRM and processor LEDs) 00019502 1. Microprocessor 2 (Microprocessor 2 is not 2. System Board functioning - check VRM and processor LEDs) 00019701 1. Microprocessor 1 (Microprocessor 1 failed BIST) 2. System Board 00019702 1. Microprocessor 2 (Microprocessor 2 failed BIST) 2. System Board 00180100 (No room for PCI option ROM) 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 00180200 (No 1. Run Configuration/Setup more I/O space available for PCI 2. Failing Adapter adapter) 3. System Board 00180300 (No more memory (above 1MB for PCI adapter) 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 00180400 (No more memory (below 1MB for PCI adapter) 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 00180500 (PCI 1. Remove Failing PCI Card option ROM checksum error) 2. System Board 00180600 (PCI device built-in self test failure) 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 00180700 1. System Board (xxxxyyyy planar PCI device not 2. PCI Card responding (where xxxx is PCI vendor ID and yyyy is PCI device ID) 00180800 (Unsupported PCI device installed) 1. System Board 2. PCI Card 114 Hardware Maintenance Manual: xSeries 200