IBM 8478 Hardware Maintenance Manual - Page 29
Installing
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
1 2 3 CMOS jumper (JBAT1) 3 2 1 Boot block jumper (JROM1) 3. Move the JROM1 jumper to the alternate position (pins 1 and 2) to enable the BIOS recovery mode. 4. Reinstall the side cover, see "Installing the cover" on page 70. 5. Reconnect all external cables and power cords and turn on the peripheral devices. 6. Insert the BIOS flash diskette in the diskette drive. 7. Restart the server. The BIOS begins the power-on self-test. 8. Select 1 - Update POST/BIOS from the menu that contains various flash (update) options. 9. When prompted as to whether you want to save the current code to a diskette, select N. 10. When prompted to choose a language, select a language (from 0 to 7) and press Enter to accept your choice. 11. Do not restart your server at this time. 12. Remove the BIOS flash diskette from the diskette drive. 13. Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the side cover, see "Removing the side cover" on page 46. 14. Move the JROM1 jumper to the normal position (pins 2 and 3) to return to normal startup mode. 15. Reinstall the side cover, see "Installing the cover" on page 70. Chapter 3. Diagnostics 19
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/29.png)