IBM 8478 Hardware Maintenance Manual - Page 46
Using, passwords
![]() |
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
A message appears above the choices on this menu to alert you that the system might malfunction if these options are configured incorrectly. Follow the instructions on the screen carefully. - Cache Control Select this choice to enable or disable the microprocessor cache. Attention: Do not make changes to the Cache Control unless directed to do so by an IBM authorized service representative. - ROM Shadowing Select this choice to enable or disable the state of a ROM shadowing. - Chipset Feature Select this choice to modify settings that control features of the core chip set on the system board. Attention: Do not make changes to the Chipset Feature unless directed to do so by IBM. - Memory Settings If a memory error is detected during POST or memory configuration, the server can automatically disable the failing memory bank and continue operating with reduced memory capacity. If this occurs, you must manually enable the memory bank after the problem is corrected. Select Memory Settings from the Advanced Setup menu, use the arrow keys to highlight the bank that you want to enable; then, use the arrow keys to select Enable. v Power Management Setup Select this choice to enable or disable system power savings. v Save and Exit Setup Select this choice to save the customized settings. v Load Optimized Defaults Select this choice to discard changes and restore the factory settings. v Exit Without Saving Select this choice if you want to exit without saving changes, or if no changes have been made. Using passwords The System Security choice appears only on the full Configuration/Setup Utility menu. After you select this choice, you can set a power-on password or an administrator password. 36 Hardware Maintenance Manual: xSeries 200
![](/manual_guide/products/ibm-8478-hardware-maintenance-manual-4ca71d5/46.png)