IBM 8478 Hardware Maintenance Manual - Page 63
Installing, ServeRAID, adapter, models
UPC - 087944650553
View all IBM 8478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
12. If you have another adapter or other options to install, do so now. 13. If you have installed a full-length adapter, rotate the front adapter support bracket to the closed (locked) position. 14. Reinstall the rear adapter retaining bracket; then, rotate the bracket to the closed (locked) position. 15. Reinstall the side cover, see "Installing the cover" on page 70 for details. 16. Reconnect the external cables and power cords; then, turn on the peripheral devices and the server. Installing a SCSI or ServeRAID adapter (some models) Complete the following steps to install a SCSI or ServeRAID adapter: 1. If you have not already installed the SCSI adapter, complete steps 1 through 10 of "Installing an adapter" on page 51. Then, return here to complete the installation. SCSI signal cable Adapter retaining bracket SCSI signal cable connector SCSI activity indicator cable connector SCSI Adapter SCSI activity indicator cable SCSI LED (J3) Adapter support bracket 2. Connect the SCSI signal cable to the adapter and one or more of the signal cable connectors to the rear of the SCSI devices. 3. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED connector (J3) on the system Chapter 5. Installing options 53