Icom IC-7610 Instruction Manual basic - Page 25
Setting the frequency, Setting the Tuning Step function, Using the Main Dial
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3 BASIC OPERATION Setting the frequency DDUsing the Main Dial 1. Select the operating band. (Example: 21 MHz) 2. Rotate MAIN DIAL . L is displayed when you set an amateur radio frequency, and ("TX" with a border of short dashes) is displayed when you set a frequency outside the Ham band, or outside your set Band Edges. DDSetting the Tuning Step function You can set MAIN DIAL 's tuning step for each operating band. This is convenient to change the operating frequency faster or slower. The following steps are set as default. ••SSB/CW/RTTY/PSK (TS OFF): ••AM (TS ON): ••FM (TS ON): 10 Hz 1 kHz 10 kHz Touch the kHz digits to turn the Tuning Step function ON or OFF. LThe Tuning Step function's icon "▼" is displayed above the 1 kHz digit when the function is ON. 1 DDChanging the Tuning Step When the Tuning Step function is ON, you can change the tuning steps for each operating mode. 2 1. Select the desired operating mode. 2. Touch the kHz digit for 1 second. 3 4 5 3. Touch the tuning step. (Example: 0.1 k) 6 ••The tuning step is set and returns to the previous screen. 7 The Tuning Step function 8 is ON. 9 10 11 12 13 DDUsing the 1 Hz step Fine Tuning function You can use the minimum tuning step of 1 Hz for fine tuning in the SSB, CW and RTTY modes as the default. 14 Touch the Hz digits for 1 second to turn the Fine 15 Tuning function ON or OFF. 16 17 18 19 The 1 Hz digit 20 is displayed. 21 LWhen using the [UP]/[DN] keys on the microphone, the frequency changes in 50 Hz steps with the Fine Tuning function ON or OFF. The Tuning Step function is ON. 3-4