Icom IC-7610 Instruction Manual basic - Page 56
MAIN/SUB DIAL Select USB DIAL, MAIN/SUB Tracking [MAIN/SUB] Switch
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
8 SET MODE Function (Continued) MENU » SET > Function [SPEECH/LOCK] Switch (Default: SPEECH/LOCK) Selects SPEECH action. Lock Function (Default: MAIN DIAL) This function electronically locks MAIN DIAL or the panel display* to prevent accidental changes. *Keys and dials are also locked except for AF RF/SQL , , KEY SPEED PITCH , POWER , and SPEECH . Memo Pad Quantity (Default: 5) Sets the number of memo pad channels. MAIN DIAL Auto TS (Default: High) Sets the Auto Tuning Step function for MAIN DIAL . When rapidly rotating MAIN DIAL , the tuning step automatically changes according to the rotation speed. MAIN/SUB DIAL Select (USB DIAL-SUB Only) (Default: MAIN/SUB) Selects whether MAIN DIAL changes only the Main band frequency, or changes both the Main and Sub band frequencies, depending on which band is selected. LThis is convenient when using the optional RC-28 remote encoder to change the Sub band frequency. MAIN/SUB Tracking [MAIN/SUB] Switch (Default: OFF) Assigns the Main and Sub band tracking function to the MAIN/SUB key. MIC Up/Down Speed (Default: Fast) Sets the response speed of on the supplied microphone when holding them down. Quick RIT/∂TX Clear (Default: OFF) Selects the operation of CLEAR for the RIT and ∂TX functions. [NOTCH] Switch (SSB) [NOTCH] Switch (AM) (Default: Auto/Manual) (Default: Auto/Manual) Selects the notch function used in the SSB or AM mode. FILTER Screen MAIN/SUB Select (Default: Auto (by FILTER, PBT Operation) Selects whether or not to automatically switch the IF filter or Twin PBT settings when Main and Sub bands are switched between each other, while displaying the FILTER screen. SSB/CW Synchronous Tuning (Default: OFF) Turns the Displayed Frequency Shift function ON or OFF. This function automatically shifts the frequency to match the CW pitch when the operating mode is toggled between SSB and CW. CW Normal Side (Default: LSB) Selects the carrier point in the CW normal mode. Screen Keyboard Type (Default: Full Keyboard) Sets the keyboard entry type to Ten-Key or Full Keyboard. Screen Full Keyboard Layout (Default: English) Select the on-screen keyboard layout between English, German and French. Screen Capture [POWER] Switch (Default: OFF) Assigns the Screen Capture function to POWER . Screen Capture Keyboard [Print Screen] (Default: OFF) Assigns the Screen Capture function to the [Print Screen] key on the USB keyboard. Screen Capture Storage Media (Default: SD Card) Selects the SD card or USB flash drive to save screen capture data. Screen Capture File Type (Default: PNG) Selects the file format for the Screen Capture function. Calibration Marker (Default: OFF) Turns the reference frequency calibration marker ON or OFF. REF Adjust Adjusts the internal reference frequency. NOTE: The default setting of "REF Adjust" may differ slightly, depending on the transceiver's version. 8-4