Icom IC-7610 Instruction Manual basic - Page 48
Formatting, Unmounting, Formatting the SD card or, USB flash drive
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
6 SD CARD/USB FLASH DRIVE Formatting Before using an SD card with the transceiver, be sure to format all SD cards with the Format function. Format, even preformatted cards for PCs or other uses. DDFormatting the SD card or USB flash drive 1. Open the SD CARD or USB FLASH DRIVE screen. MENU » SET > SD Card MENU » SET > USB Flash Drive 2. Touch "Format." (Example: SD card) Unmounting Before you remove a card when the transceiver is ON, be sure to electrically unmount it, as shown below. Otherwise the data may be corrupted or deleted. LAfter unmounting, SD card indicator turns OFF or "USB" disappears from the screen. 1. Open the SD CARD or USB FLASH DRIVE screen. MENU » SET > SD Card MENU » SET > USB Flash Drive 2. Touch "Unmount." (Example: SD card) 3. Touch [YES] to unmount. 3. Touch [YES] to start formatting. LTo cancel formatting, touch [NO]. ••After formatting, returns to the SD CARD set screen. 4. To close the SD CARD set screen, push EXIT several times. 4. Remove the card from the transceiver. Remove Turns OFF q Push in w Pull out LPush in the SD card until a click sounds to unlock the card and to pull it out. 5. To close the SD CARD or USB FLASH DRIVE set screen, push EXIT several times. When the transceiver is OFF You can unmount the SD card or USB flash drive starting from step 4 of the steps described above. 6-2