Icom IC-7610 Instruction Manual basic - Page 41
Setting the keying speed, Using the Break-in function, Semi Break-in mode
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4 RECEIVING AND TRANSMITTING Operating CW (Continued) DDSetting the keying speed You can set the keying speed of the internal electronic keyer. 1. Select the CW mode. 2. Rotate KEY SPEED PITCH (inner) to set the keying speed to between 6 and 48 WPM (Word Per Minutes). KEY SPEED PITCH ••The keying speed is displayed under the time display while setting. DDUsing the Break-in function Use the Break-in function in the CW mode to 1 automatically switch between transmit and receive when keying. The IC-7610 is capable of Semi Break-in 2 and Full break-in modes. 3 TIP: The key type is set to "Paddle" by default. You can select the keyer type on the CW-KEY SET screen. 4 (p. 4-13) 5 Semi Break-in mode In the Semi Break-in mode, the transceiver transmits 6 when keying, and then automatically returns to receive after a preset time, after you stop keying. 7 1. Select the CW mode. 2. Touch [BK-IN] in the function menu to select 8 "SEMI." LTouching [BK-IN] changes between "BKIN (Semi 9 Break-in)," "F-BKIN (Full Break-in)" or OFF (no indication). 10 11 12 13 14 Touch [BK-IN]. 15 3. To adjust the Semi Break-in Delay time, touch [BK-IN] for 1 second. 16 ••Opens the BKIN menu. 17 18 19 4. Rotate MULTI to set to where the transceiver does not return to receive while keying. LWhen you are using a paddle, rotate KEY SPEED PITCH (inner) to adjust the key speed while operating the paddle. See the left column for details. 5. To close the BKIN menu, push EXIT . 20 21 4-11