Icom IC-7610 Instruction Manual basic - Page 75
LAN, EXT-DISPLAY, USB 2, EXT-SP A / EXT-SP B, REF IN, LINK/ACT, Speed, Information - driver
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
13 CONNECTOR INFORMATION LAN ••Time synchronization by an NTP server. ••Outputs the demodulated signal or 12 kHz IF signal. LYou can select the output signal from AF and IF signals. MENU » SET > Connectors > LAN AF/IF Output About the LED indication q LINK/ACT ••Lights when a cable is connected. ••Does not light when a cable is not connected. ••Blinks while communicating. wq w Speed ••Lights while communicating in 100BASE-TX. ••Does not light while communicating. ••Blinks while communicating in 10BASE-T, or not connected. EXT-DISPLAY Connects to an external display monitor. Outputs the digital RGB signal. (DVI-D) LSet the external display settings on the following screen. MENU » SET > Display > External Display USB 2 USB (1.1/2.0/3.0) type B This USB port is for digital data input or output. LThe required USB driver and driver's installation guide can be downloaded from Icom web site. USB 1 USB (1.1/2.0) type B Connect to the PC when: 1 ••Outputting the decoded FSK (RTTY) data. ••Outputting the demodulated AF signal or 2 12 kHz IF signal. ••Interface for the remote control by the 3 CI-V command. LYou can change the signal output type and output 4 level. MENU » SET > Connectors > USB Output Select 5 MENU » SET > Connectors > USB AF Output Level 6 MENU » SET > Connectors > USB IF Output Level 7 LYou can download the USB driver and installation guide from the Icom website. 8 http://www.icom.co.jp/world/support/download/firm/ index.html 9 EXT-SP A / EXT-SP B 10 11 Connects to external speakers. 3.5 mm, ⅛ in (d) 12 ••Output impedance: 4 ~ 8 Ω ••Output level: More than 2.0 W at 10% 13 distortion into an 8 Ω load. 14 LL Informatio ••The internal speaker is deactivated while an 15 external speaker is connected. 16 ••[EXT-SP A] is for the Main band and [EXT-SP B] is for the Sub band. 17 REF IN 18 Inputs a 10 MHz signal as a reference frequency 19 signal. 20 ••Input frequency: 10 MHz ••Impedance: 50 Ω (unbalanced) 21 ••Input level: -10 dBm (approximate) LSelect the transceiver's reference signal source. MENU » SET > Connectors > REF IN LAdjust the internal reference frequency. MENU » SET > Function > REF Adjust 13-5