Icom IC-7610 Instruction Manual basic - Page 36
Digital Selector, Notch Filter, Turning ON the Digital Selector function, Adjusting
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 RECEIVING AND TRANSMITTING Digital Selector You can manually adjust the center frequency of the automatic preselector using the Digital Selector function. The automatic preselector adds selectivity ahead of the 1st mixer. This reduces intermodulation distortion from nearby strong signals. The automatic preselector tracks the frequency tuning by changing its resonant frequency in discrete steps. The Digital selector is used within the ham band, except for the 50 MHz band. DDTurning ON the Digital Selector function 1. Push MENU to open the MENU screen. 2. Touch [DIGI-SEL] to turn ON the Digital Selector function ON. LTouching [DIGI-SEL] to turn the function ON or OFF. Notch Filter The IC-7610 has Auto Notch and Manual Notch functions. Auto Notch can be used in the SSB, AM and FM modes, and Manual Notch can be used in the SSB, CW, RTTY, PSK, and AM modes. DDSelecting the Notch function type 1. Push MENU . 2. Touch [NOTCH] to select the Notch function type. LTouching [NOTCH] changes between "AN (Auto Notch)," "MN (Manual Notch)" and OFF. ••"AN" is displayed when the Automatic Notch function is ON, and "MN" is displayed when the Manual Notch function is ON. DDAdjusting the center frequency 1. While the MENU screen is displayed, touch [DIGI-SEL] for 1 second. ••The Multi-function menu is displayed, and the Digital Selector adjustment is automatically selected. 3. To close the MENU screen, push EXIT . DDAuto Notch function The Auto Notch automatically attenuates beat tones, tuning signals, and so on. L"AN" is displayed when the Automatic Notch function is ON. 2. Rotate MULTI to adjust the center frequency. 3. To close the Multi-function menu, push EXIT . NOTE: ••When you rotate MAIN DIAL while the Digital Selector is ON, mechanical noise may be heard due to the switching noise from internal relays. ••The P.AMP 1 or P.AMP 2 preamps cannot be used while using the Digital Selector. 4-6