Icom IC-7610 Instruction Manual basic - Page 57
Connectors, AF/IF XFC Output SPLIT
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
SET MODE 8 Connectors MENU » SET > Connectors > Phones Level (Default: 0) Sets the audio output level ratio of the headphone and internal speaker between -15 and +15. L/R Mix (Default: OFF) Selects to output the mixed audio from the headphones or to output the Main band's audio from the leftside and the Sub band's audio from the rightside. MENU » SET > Connectors > ACC AF/IF Output AF/SQL Output Select (Default: MAIN) Selects the audio and squelch signals to output from [ACC1] (Audio: pin 5, Squelch: pin 6) in the Main and Sub bands. Output Select (Default: AF) Selects AF signal or IF signal to output from [ACC]. AF/IF XFC Output (SPLIT ON) (Default: SUB) Selects the signal output from [ACC1] while XFC is held down in split operation. AF Output Level Sets the AF output level of [ACC]. (Default: 50%) AF SQL (Default: OFF (Open)) Selects whether or not to output the audio from [ACC], according to the squelch state. AF Beep/Speech... Output (Default: OFF) Sets the Beep and Speech audio output setting of [ACC]. LYou should set the "AF SQL" item to "AF." LThe beep level is limited when the "Beep Level Limit" item is "ON." ACC IF Output Level Sets the IF output level of [ACC]. (Default: 50%) MENU » SET > Connectors > USB AF/IF Output Output Select (Default: AF) Selects the signal output type from [USB1]. AF/IF XFC Output (SPLIT ON) (Default: SUB) Selects the signal output from [USB1] while XFC is held down in split operation. AF Output Level Sets the AF output level of [USB1]. (Default: 50%) AF SQL 1 (Default: OFF (Open)) Selects whether or not to output the audio from [USB], according to the squelch state. 2 AF Beep/Speech... Output 3 (Default: OFF) Sets the Beep and Speech audio output setting of [ACC]. LYou should set the "AF SQL" item to "AF." 4 LThe beep level is limited when the "Beep Level Limit" item is "ON." 5 IF Output Level 6 (Default: 50%) Sets the IF output level of [USB]. 7 MENU » SET > Connectors > LAN AF/IF Output 8 Output Select (Default: AF) Selects the signal output type from [LAN]. 9 AF SQL 10 (Default: ON) Selects the squelch behavior of [LAN]. 11 MENU » SET > Connectors > MOD Input 12 ACC MOD Level (Default: 50%) Sets the modulation input level of [ACC]. 13 USB MOD Level 14 (Default: 50%) Sets the modulation input level of [USB]. 15 LAN MOD Level (Default: 50%) Sets the modulation input level of [LAN]. 16 DATA OFF MOD 17 (Default: MIC,ACC) Selects the connector(s) to input the modulation signal when the data mode is OFF. 18 19 20 21 8-5