Icom IC-7610 Instruction Manual basic - Page 26
Directly entering a frequency, Using the 1/4 Tuning function, Entering the operating frequency
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3 BASIC OPERATION Setting the frequency (Continued) DDUsing the 1/4 Tuning function With the Tuning Function OFF, turn ON the 1⁄4 Tuning function to reduce the tuning speed to 1⁄4 of the normal speed, for finer tuning in the SSB-D, CW, RTTY and PSK modes. 1. Push MENU . 2. Touch [1/4]. DDDirectly entering a frequency You can directly enter a frequency using the keypad. Entering the operating frequency 1. Touch the MHz digits. (Example: 14) 2. Touch [F-INP]. ••Opens the F-INP screen. 3. Push EXIT to close the MENU screen. 1/4 Tuning function ON 3. Start by entering the MHz digits. LTo clear the entry, touch [CE]. LTo clear the entry and return to the previous screen, push EXIT . 4. Touch [ENT] to save the entered frequency. ••Closes the F-INP screen. DDUsing the Auto Tuning Step function The tuning step automatically changes, depending on the rotating speed of MAIN DIAL . LYou can change the Auto Tuning Step function settings in the following menu. (p. 8-4) MENU » SET > Function > MAIN DIAL Auto TS LIf you touch [ENT] when the digits under 100 kHz are not entered, "0" will be automatically entered into the digits that are blank. Entry examples ••14.025 MHz: [1], [4 0], [2], [5], [ENT] ••18.0725 MHz: [1], [8 0], [7], [2], [5], [ENT] ••730 kHz: [0 7], [3], [ENT] ••5.100 MHz: [5 1], [ENT] ••7.000 MHz: [7], [ENT] ••Changing from 21.280 MHz to 21.245 MHz: 2], [4], [5], [ENT] 3-5