Icom IC-7610 Instruction Manual basic - Page 42
Monitoring the CW side tone, APF Audio Peak Filter operation, POSITION, WIDTH, AF LEVEL
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 RECEIVING AND TRANSMITTING Operating CW DDUsing the Break-in function (Continued) Full Break-in mode In the Full Break-in mode, the transceiver automatically transmits while keying down, and then immediately returns to receive after keying up. 1. Select the CW mode. 2. Touch [BK-IN] in the function menu to select "FULL." LTouching [BK-IN] changes between "BKIN (Semi Break-in)," "F-BKIN (Full Break-in)" and OFF (no indication). DDAPF (Audio Peak Filter) operation The APF enables you to set excellent selectivity in the CW mode. You can set the selectivity to between the three APF passband width, WIDE, MID or NAR. 1. Select the CW mode. 2. Push APF/TPF to turn ON the Audio Peak Filter. APF/TPF Touch [BK-IN]. 3. Use a straight key or paddle to operate. LIn the Full break-in mode, the transceiver automatically returns to receive without a preset break-in delay time after you stop keying. The transceiver receives while keying up. DDMonitoring the CW side tone When the transceiver is in standby and the Break-In function is OFF, you can listen to the CW side tone without actually transmitting. LLInformatio ••This enables you to match your transmit frequency exactly to another station's by matching the audio tone. ••You can also use the CW side tone (be sure the Break-in function is OFF) to practice CW sending. ••You can adjust the CW side tone level in "Side Tone Level." MENU » KEYER > EDIT/SET > CW-KEY SET > Side Tone Level ••The APF icon is displayed, and the APF indicator on the key lights. LPushing APF/TPF turns the Audio Peak Filter ON or OFF. LWhen the APF Type is set to "Sharp" in step 4, the selected passband width of "320 Hz," "160 Hz" or "80 Hz" is displayed under the APF icon for 1 second. 3. Hold down APF/TPF for 1 second to open the APF menu. 4. Touch to select the item, and then set the audio filter position, passband width, and the audio level. POSITION: Rotate MULTI to shift the peak frequency of the APF. This function enables you to avoid interference from adjacent frequencies. WIDTH: Touch to select WIDE, MID or NAR. TYPE: Select the audio filter type (soft sound or sharp sound). AF LEVEL: S et the audio level between 0 dB and +6 dB in 1 dB steps. 5. To close the APF menu, push EXIT . 4-12