Icom IC-7610 Instruction Manual basic - Page 60
Display, APF-Width Popup APF OFF→ON
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
8 SET MODE Network (Continued) Primary DNS Server (Default: -) If there are two DNS server addresses, enter the primary DNS server address. 2nd DNS Server (Default: -) If there are two DNS server addresses, enter the secondary DNS server address. Network Name (Default: -) lf you are operating the IC-7610 using the optional RS-BA1, enter a network name of up to 15 characters. Network Control (Default: OFF) lf you are operating the IC-7610 using the optional RS-BA1, select "ON." Power OFF Setting (for Remote Control) (Default: Shutdown only) Selects whether to shutdown or to enter the remote standby mode after the transceiver is turned OFF. Control Port (UDP) (Default: 50001) lf you are operating the IC-7610 using the optional RS-BA1 software, set a port number for the control signal between the IC-7610 and the remote station. Serial Port (UDP) (Default: 50002) lf you are operating the IC-7610 using the optional RS-BA1 software, set a port number for the serial data between the IC-7610 and the remote station. Audio Port (UDP) (Default: 50003) lf you are operating the IC-7610 using the optional RS-BA1 software, set a port number for the audio signal between the IC-7610 and the remote station. Internet Access Line (Default: FTTH) lf you are operating the IC-7610 using the optional RS-BA1 software, set the port number for the audio signal between the IC-7610 and the remote station. MENU » SET > Network > Network User1 MENU » SET > Network > Network User2 Network User1 ID Network User2 ID (Default: -) (Default: -) lf you are operating the IC-7610 using the optional RS-BA1, enter a user name of up to 16 characters. Network User1 Password Network User2 Password Enter a password for each user. (Default: -) (Default: -) Network User1 ID Administrator Network User1 ID Administrator (Default: NO) (Default: NO) Sets the user as the administrator. Only the authorized user can disconnect the communication between the IC-7610 and the remote station. MENU » SET > Network Network Radio Name (Default: IC-7610) If you are operating the IC-7610 using the optional RS-BA1 software, enter a name of up to 15 characters. Display MENU » SET > Display LCD Backlight Sets the LCD backlight brightness. (Default: 50%) LED Bright Sets the LED brightness. (Default: 50%) Display Type Sets the display type to A or B. (Default: A) Display Font (Default: Basic) Selects the font for the frequency readout. Meter Response (Standard, Edgewise)(Default: Mid) Sets the meter needle response speed to Slow, Mid or Fast. Meter Type (Normal Screen) (Default: Standard) Sets the S/RF meter type for the normal display to Standard, Edgewise or Bar. Meter Type (Expand Screen) (Default: Bar) Sets the S/RF meter type for the expanded display to Standard, Edgewise or Bar. Meter Peak Hold (Bar) (Default: ON) Turns the Meter Peak Hold function ON or OFF. Memory Name (Default: ON) Turns the Memory name display in the Memory mode ON or OFF. APF-Width Popup (APF OFF→ON) (Default: ON) Turns the APF filter width display ON or OFF. 8-8