Icom IC-7610 Instruction Manual basic - Page 54
Tone Control, Function, Beep Confirmation
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
8 SET MODE Tone Control MENU » SET > Tone Control > RX > SSB RX HPF/LPF (Default Sets the cut-off frequencies for the receive audio highpass filter and low-pass filter in 100 Hz steps, in the SSB mode. LIf this item is set, the "RX Bass" and "RX Treble" items are automatically set to "0." RX Bass RX Treble (Default: 0) (Default: 0) Sets the bass or treble level of the receive audio. MENU » SET > Tone Control > RX > AM RX HPF/LPF (Default Sets the cut-off frequencies for the receive audio highpass filter or low-pass filter in 100 Hz steps, in the AM mode. Selectable ranges: LIf this item is set, the "RX Bass" and "RX Treble" items are automatically set to "0." RX Bass RX Treble (Default: 0) (Default: 0) Sets the bass or treble level of the receive audio. MENU » SET > Tone Control > RX > FM RX HPF/LPF (Default Sets the cut-off frequencies for the receive audio highpass filter or low-pass filter in 100 Hz steps, in the FM mode. LIf this item is set, the "RX Bass" and "RX Treble" items are automatically set to "0." FM RX Bass FM RX Treble (Default: 0) (Default: 0) Sets the bass or treble level of the receive audio. MENU » SET > Tone Control > RX > CW MENU » SET > Tone Control > RX > RTTY MENU » SET > Tone Control > RX > PSK RX HPF/LPF (Default Sets the cut-off frequencies for the receive audio highpass filter or low-pass filter in 100 Hz steps in the CW, RTTY, and PSK modes. MENU » SET > Tone Control > TX > SSB TX Bass TX Treble (Default: 0) (Default: 0) Sets the bass or treble level of the transmit audio. TBW (WIDE) TBW (MID) TBW (NAR) (Default: 100 - 2900) (Default: 300 - 2700) (Default: 500 - 2500) Sets the transmission pass bandwidth to wide, mid, or narrow, by changing the lower and higher cut-off frequencies. MENU » SET > Tone Control > TX > AM TX Bass TX Treble (Default: 0) (Default: 0) Sets the bass or treble level of the transmit audio. MENU » SET > Tone Control > TX > FM TX Bass TX Treble (Default: 0) (Default: 0) Sets the bass or treble level of the transmit audio. Function MENU » SET > Function Beep Level (Default: 50%) Sets the beep output level. LIf the "Beep (Confirmation)" item is set to "OFF," no beeps sound. Beep Level Limit (Default: ON) Selects whether or not to limit the volume up to the specified level. Beep (Confirmation) (Default: ON) Turns the Confirmation beep ON or OFF. LIf the "Beep Level" item is set to "0%," no beep sounds. Band Edge Beep (Default: ON (Default)) Turns the Band Edge beep ON or OFF. LLInformatio ••If the "Beep Level" item is set to "0%," no beep sounds. ••When you tune into an amateur band's frequency range, the high Band Edge beep sounds. ••When you tune out of an amateur band's frequency range, the low Band Edge beep sounds. 8-2