Icom ID-4100A User Manual - Page 16
INSTALLATION AND CONNECTIONS, ■ Attaching the controller, ◇ When attaching to the main unit
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1 INSTALLATION AND CONNECTIONS ■■Attaching the controller DDWhen attaching to the main unit Attaching: Slide the controller in the direction of the arrow until the controller is locked and makes a 'click' sound. Place the unit's tabs into the controller's slots. Controller Main unit Detaching: 1. Push the release button on the main unit. (q) 2. Slide the controller to the left (w), then pull it out. (e) Release button DDWhen connecting to the main unit Connect the controller to the main unit with the supplied control cable. LLThe following longer cables are usable, depending on the installation location. ••OPC-440 mic extension cable: 5 m (16.4 ft)* ••OPC-647 mic extension cable: 2.5 m (8.2 ft)* ••OPC-1156 controller extension cable: 3.5 m (11.4 ft)* ••SP-30 external speaker: 2.8 m (9.1 ft)* ••SP-35 external speaker: 2 m (6.5 ft)* ••SP-35L external speaker: 6 m (19.6 ft)* *Approximate 6-pin connector Controller q Main unit w e 1 BASIC MANUAL Main unit 6-pin connector