Icom ID-4100A User Manual - Page 63
■ Inserting the microSD card
![]() |
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
7 RECORDING A QSO ONTO A microSD CARD ■■Inserting the microSD card NOTE: Before inserting, be sure to check the card direction. If the card is forcibly or inversely inserted, it will damage the card and/or the slot. 1. Turn OFF the transceiver. 2. Insert the card into the slot until it locks in place, and makes a 'click' sound. 3. Turn ON the transceiver. ••" " is displayed when the microSD card is inserted. LLWhile accessing the microSD card, " " and " " alternately blink. Front panel (Main unit) microSD card Cut corner side Terminals facing down 1 2 DDFormatting the microSD card Before using a microSD card, format it to be used with the 3 transceiver by doing the following steps. 4 LLFormatting a card erases all its data. Before formatting any used card, back up its data onto your PC. 5 6 SD Card > Format 7 1. Turn OFF the transceiver, then insert the card into the slot. 8 2. Turn ON the transceiver. 9 ••Displays " ." 3. Push [MENU]. 10 4. Rotate [DIAL] to select "SD Card," then push Displays the SD CARD screen. 11 5. Select "Format," then push [ï]. 12 ••The confirmation dialog "Format OK?" is displayed. 6. Select , then push [ï]. 13 14 15 16 ••The formatting starts and the display shows the formatting 17 progress. LLAfter formatting ends, the display automatically returns to 18 the screen displayed before the "Format OK?" window. 19 BASIC MANUAL 48
![](/manual_guide/products/icom-id4100a-user-manual-b0b6df7/63.png)