Icom ID-4100A User Manual - Page 37
■ Selecting the operating band, ■ Selecting the operating mode
![]() |
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
BASIC OPERATION 3 ■■Selecting the operating band The transceiver can receive on the AIR, 144 MHz, 230 MHz, 300 MHz, and 430 MHz bands.* You can transmit on only the amateur band frequencies. *Selectable band differs, depending on the transceiver's version. 1. Push [V/M] several times until you enter the VFO mode. 2. Push [BAND]. ••Enters the Band Select mode. 3. Rotate [DIAL] to select an operating band. 4. Push [ï]. ••Sets the band, then returns to the standby screen. TIP: You can select the operating band in the Quick Menu window. 1. Push [QUICK]. 2. Rotate [DIAL] to select "Band Select," then push [ï]. 3. Select an operating band, then push [ï]. ■■Selecting the operating mode The transceiver has a total of 5 operating modes, AM, AM-N, FM, FM-N, and DV. 3 By pushing [MODE], you can select an operating mode. LL Informatio ••You can select the AM mode for only the AIR, 230 MHz, and 300 MHz bands. ••You can select the AM-N mode for only the AIR band. ••You can select the FM, FM-N, or DV modes for only the 144 MHz, 230 MHz, 300 MHz, and 430 MHz bands. ••While in the FM-N mode, the TX modulation is automatically set to narrow (approximately ±2.5 kHz). ••When you set the "GPS TX Mode" item to "D-PRS" or "NMEA," is displayed besides the mode icon. See the Advanced manual for details. (Section 5) [BAND]/[ï] [DIAL] [V/M] [MODE] BASIC MANUAL 22
![](/manual_guide/products/icom-id4100a-user-manual-b0b6df7/37.png)