Icom ID-4100A User Manual - Page 50

4 MENU SCREEN ■■ Menu items and their details (Continued) CSV Format (QSO/RX Log) Set CSV format options. Separator/Decimal Selects the separator and the decimal character for the CSV format. Date Selects the date format. Function Sets various function's options. Squelch/ATT Select Selects to use the S-Meter Squelch or the Attenuator function for the [SQL] control. Squelch Delay Selects to shorten or lengthen the time until the squelch opens. Fan Control Selects the cooling fan control condition. Dial Speed-UP Turns the dial speed acceleration ON or OFF. Auto Repeater* Turns the Auto Repeater function ON or OFF. Remote MIC Key Selects the key function for [F-1] or [F-2] on the supplied remotecontrol microphone. During RX/Standby Selects the key function to be used while receiving or in the standby mode. During TX Selects the key function to be used while transmitting. 35 BASIC MANUAL Up/Down MIC Key Selects the key function for [UP] or [DN] on the optional hand microphone. During RX/Standby Selects the key function to be used while receiving or in the standby mode. During TX Selects the key function to be used while transmitting. One-Touch PTT(Remote MIC) Turns the One-Touch PTT function ON or OFF. PTT Lock Turns the PTT Lock function ON or OFF. Busy Lockout Turns the Busy Lockout function ON or OFF. Time-Out Timer Selects the Time-Out Timer time options. Active Band Enables continuous frequency selection across all bands by rotating [DIAL]. MIC Gain Sets the microphone sensitivity to suit your preference. Data Speed Selects the data transmission speed for low-speed communication, or between the [DATA] jack and external modules like a GPS receiver, and so on. CI-V Set CI-V options. *Does not appear, depending on the transceiver version.