Icom ID-4100A User Manual - Page 45
Voice TX, GPS Out To DATA jack - aprs
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Voice TX Set microphone voice recording options. Record* Starts recording the microphone audio. TX Set Repeat Time Sets the repeat interval. The transceiver repeatedly transmits the recorded voice audio at this interval. TX Monitor The TX Monitor function outputs the TX voice audio from the speaker during voice transmission. * The transceiver transmits the recorded voice audio. GPS Set GPS options. GPS Set GPS Select Selects either the internal or an external GPS receiver that the transceiver receives its position data from. Manual Position Manually enter your current position. GPS Out (To DATA jack) Turns the output of GPS information from the internal GPS receiver to the [DATA] jack ON or OFF. GPS TX Mode Set the GPS TX mode. OFF Turns OFF the GPS TX function. MENU SCREEN 4 D-PRS (DV-A) (GPS > GPS TX Mode) Set D-PRS options. Unproto Address Enters an unproto address, or keeps the default. TX Format Position 4 Symbol Selects a D-PRS Symbol to transmit. SSID Selects the APRS® call sign SSID. Comment Enters a comment to transmit. Time Stamp Selects the format to transmit the current UTC time as a time stamp. Altitude Turns the altitude transmit option ON or OFF. Data Extension Selects whether or not to transmit the course/speed, power/height/gain/directivity data. Power Selects a base station's TX power level to transmit. Height Selects a base station's height to transmit. Gain Selects a base station's antenna gain to transmit. Directivity Selects a base station's antenna directivity to transmit. *A microSD card is required. BASIC MANUAL 30